If you want the right signal for the DD Freedish antenna then this information is for you. Here we assume that your DD Freedish set-top box either has no signal or you want to install a new dish antenna.
First of all, you will have to buy the accessories of DD Freedish from the local market, although if it is not available in the local market, then it will be available online through a website like Amazon.
DD Freedish Accessories must have the following:
- dish antenna
- Free-to-air set-top box or i-case set-top box
- Coaxial cable from dish antenna to the set-top box
- At least two coaxial connectors to connect
- An LNB to receive the signal from the dish antenna
How to do system fitting? (installation)-
Firstly how to connect LNB on dish antenna as shown in the photo below
Now fit the dish antenna mount ie stand on the ceiling or wall, but keep in mind that the east direction should be completely clear.
After installing the dish antenna, remove the coaxial cable and fit the connectors on both sides.
Now connect this cable to your set-top box and dish antenna.
Now, look at the fittings of the dish antenna of the neighbors around you. The direction in which they have installed the dish antenna (mainly Dish TV, Zing Digital, or Sun Direct, etc.) is to fit their dish antenna in the same direction, ie in the same position, but now it is not to be tightened now.
Now come to the TV and connect the set-top box to the TV via HDMI or AV cable.
What to do if no signal comes in the free dish?
Now you may see no signal. So for this now you have to put your dish antenna in the right direction or position. Check the quality of the satellite signal by pressing the Info button on your remote.
Now standing behind the dish antenna, move the dish antenna very slowly first left if the signal does not come then right and check the signal.
If you move the strength and quality line back and forth a bit, then it will stop and try to bring as much signal as possible by moving the dish antenna up and down.
As soon as the signal reaches more than 60%, set your dish antenna and tighten it.
Now come to the set-top box and delete all the channels already filled. Then auto or blind scan. Channel type must be FTA or Free while scanning
You will see that more than 180 TV channels have been saved in your set-top box. If you want, you can also scan your set-top box manually. For this, the list of the latest frequencies will be available from here.
If still, you are facing difficulty in installing the DD Freedish system, then tell us through comment, we will give you information about that question by modifying this post.
your questions-
What does No Program Found mean?
This also means no signal connection of your dish antenna or dish correct antenna signal
What should be the frequency of freedish?
Check out the new frequency of Free Dish from here.
How to set channels in the setup box?
For that, you have to see the setting of the set-top box from here
Which satellite does DD Free Dish have?
G-SAT15 is a freedish satellite
How to set free dish?
For this, you see how to set an umbrella